BTJUNKIES

Most of you BTjunkie as being one of the largest torrent file sharing website.

5th Feb Sunday night, the site suddenly shut down voluntarily.

Though the site never had any legal action taken against it like Pirate Bay or MegaUpload, I beleive its owners probably didn’t want to go through the same problem there Sister Sites have been through. thro This is a very smart move since it was rated amongst the top five torrent sites in most polls over the Internet




This all is to Stop Online Piracy Act (SOPA) and PROTECT IP Act (Preventing Real Online Threats to Economic Creativity and Theft of Intellectual Property Act, or PIPA)

The PROTECT IP Act says that an "information location tool shall take technically feasible and reasonable measures, as expeditiously as possible, to remove or disable access to the Internet site associated with the domain name set forth in the order". In addition, it must delete all hyperlinks to the offending "Internet site"

Hyper Terminal in Windows 7

If you’ve recently upgraded to Windows 7 and are banging your head to find HyperTerminal, then you’re not alone!

HyperTerminal was a little program that let you connect to other devices.

Windows 7 will no longer provide HyperTerminal program. If you need HyperTerminal to control serial devices, there is a trick to get it back

However, there are several new alternatives to HyperTerminal that are probably better for secure shell access. use the following

winrs /?

If you still miss Hyper Terminal and you cannot live with out it then you can actually extract two files from your XP installation and copy them over to Windows 7.

The two files you will need are

hypertrm.dll

hypertrm.exe

Simply copy those files into any directory on your machine and it will work. You should be able to find hypertrm.exe in C:\Program Files\Windows NT and

hypertrm.dll in C:\Windows\System32.

If you have the Windows XP CD, you should be able to find both of these files in the i386 directory on the CD.

since Hyper treminal is not available you still have alternative

Putty

Tera Term

Enjoy.... :)

Warning Turn Facebook RED , Black, PINK

Switch to pink Facebook!!!

Don't fall for online scams you might receive invite from your Facebook friends if you have any :) inviting you to switch your boring blue Facebook profile logo to Pink, Black and some others

amazingly at the time of this blog the total invite figure stands at Invited (126,511)

Switch to Pink Facebook (Limited Time!) as shown above

Say goodbye to the boring blue profile and say hello to the pink profile!!

If you click on one of the link you are asked to share the link with your friends and BBB ang ... this is where it goes fishy, do you think any legitimate organization or application would need you to share something before you experience if it is good or just a scam/ waste of time.

Once you do this you are asked to leave comments and any comments you leave will be seen by others and encourage them to start clicking which will give more traffic to the scammer which is a survey. More people do the survey more money scammer will get.if you have not received this Scam message yet please check your Facebook page to ensure that you are not spreading any spammed messages

You would see some messages Like this , they fall into this scam but messaging other dont trust :)

Quick Cisco Switch and Router Troubleshooting

Haye.. !! some helpful quick troubleshooting commans

show run sec class-map
show run sec policy-map
sh run sec router
sh run sec crypto
sh run inc ip access-group
sh run inc ip local
sh run inc ip policy
sh run inc service-policy
sh run inc ip access-group
sh run inc vlan filter

Cisco and HP Procurve Trunk 802.1Q

This post only discusses how to configure an 802.1q VLAN trunk between a Cisco switch and an HP ProCurve switch. In this test I am using Cisco 3560 and HP ProCurve 2910 AL over here trunking refer to an 802.1q tagged VLAN trunk. Don’t get confused in Procurve world trunking refers to a feature like ether channel in Cisco world.

Mind that ISL trunk will not work between Cisco and HP because it is Cisco proprietary protocol. The trunk between a Cisco and HP Procurve switch must be 802.1q I rarely see ISL in use these days, and I personally consider 802.1q the preferred method of encapsulation if for no other reason than its interoperability.

Once you have configured all of the required VLANs (I hope I don’t need to explain how to configure VLANS) now configure the trunk on the Cisco switch in fa0/48 is our trunk port connected to HP ProCurve using the following commands:

Cisco3560(config)# interface fa0/48
Cisco3560(config-if)#switchport mode trunk
Cisco3560(config-if)# switchport trunk allow vlan 1,2,3
Cisco3560(config-if)#no shut

In this example I am using three VLANS Vlan 1 , 2, and 3
Here interface Fa0/48 is the trunk port on the Cisco switch.

Procurve switches, can have a VLAN either tagged or untagged on any particular port as shown in the configuration below.

HP2910al(config)#vlan 2
HP2910al(Vlan-2)#tagged 48

Now we have enabled trunk interface between HP and Cisco for Vlan 2 only, trunk will not carry any traffic a part from Vlan 2 in order to allow Vlan 3 traffic on Trunk we need to setup port 48 in HP switch as tagged port for Vlan 3 (Clear as MUD.. !!!!)

HP2910al(config)#vlan 3
HP2910al(Vlan-2)#tagged 48

Key point you have to setup uplink port 48 in our case on HP as tagged port for all the vlan that will pass through the trunk.

Now test connectivity between two hosts that are in the same VLAN i.e Vlan 2 , but on different switches. As you have learnt, configuration of 802.1q trunks between Cisco and HP Procurve switches is not a rocket science . if its not working double check the config and every thing should be fine.

HP and Cisco commands Reference

Hi Everyone , forget about the fight which one is the better technology every product have its on Pros and Cons .
I am sharing here some terminologies and command differences , I hope they would be helpful

HP aggregated interfaces are called trunks and Cisco it is EtherChannel.

The confusion arises because term trunk is used differently in Cisco and HP. In Cisco trunk is an interface that is configured to support 802.1Q (VLAN). which is configured to support multiple VLANs is called a trunk however in HP Prociurve operating system, an interface that supports multiple VLANs is tagged.

Remeber these guidelines

An “access port” on Cisco is an “untagged port” on HP ProCurve.
A “trunk port” on Cisco is a “tagged port” on HP ProCurve.
A “port channel” on Cisco is called a “trunk” on HP ProCurve.
A Cisco "Access port" is "untagged" in HP Procurve

Trunking from the ProCurve side is meant to aggregate multiple ports together, while on Cisco it is meant to transport multiple VLANs over one port.

Link aggregation on the Cisco side is called “channeling"

*****Some main Hints and Tips******

Pay attention to multi-VLAN ports.
Make sure that the native VLAN on the Cisco trunk is the untagged VLAN on the ProCurve tagged port.
Ensure that the same VLANs are allowed and configured on both sides.
Remember that, unlike with Cisco, BPDUs (spanning tree, LLDP, and LACP) are not attached to the untagged port or any VLAN on HP ProCurve

To combine Cisco and HP ProCurve spanning tree networks, MSTP can be run on the Cisco devices, or PVST Cisco networks can be combined with MSTP HP ProCurve networks, I am running PVST on Cisco network and I added couple of HP Procurves with RSTP and didn't caused any problem, make sure you modify the priority at HP or cisco as per requirement.


Cisco supports Hot Standby Router Protocol (HSRP), and HP ProCurve supports Virtual Router Redundancy Protocol (VRRP), during migration ensure that both cores are from the same
vendor, whether HP ProCurve or Cisco. If you replace one core, replace the other at the same time.

Finally Routing Protocol HP doesn't support Cisco proprietary routing protocols.

There are some minor differences to consider between the two different OSPF implementations:

• Cisco OSPF is enabled with network statements globally.


• HP ProCurve OSPF is enabled within the VLAN context.


• There are redistribution differences.


• HP ProCurve is always non-broadcast multiple access (NBMA).


• Cisco uses the highest loopback IP address for router ID, while HP ProCurve devices typically use the lowest.


• With HP ProCurve, the loopback is always /32 mask.


• With HP ProCurve, the OSPF link cost is “1” by default.

Toughest Job interview Questions

I and my friends have recently gone though some interviews processes, last night we thought to share our experience to help others.

Below are top tough interview questions that you may face, there is no obvious right answers that is aimed to highlight your abilities and strengths.

1. Describe your self.

It is definitely not an invitation to give your life history they are not interested in this. You should aim to describe the kind of person you are in a couple of minutes at most. Concentrate on positive qualities, and link them to the key responsibilities of the job you're applying for.

2.What do you enjoy most in your current job?

It is tricky question he actually wants to know what you don’t link in this job. The key is that you like everything about your job. Pick some part of current job that matches new job for which you are interviewed fro.

3. What do you feel you can bring to this job?

This is another question that gives you a chance to shine. You need to link your past experience or skills to the requirements of the job. Pick up to three key strong points in your favour that are relevant to this job.

4. What is your biggest weakness?

Huummm!!! it is hard and very easy at the same time depending if you are prepared for it or not, I always answer 'I'm useless at getting round to household jobs - changing light bulbs and fixing leaky taps. Avoid giving any weakness like I don’t like taking OrdersJ. Then why you are here start your own business.

5. What is your goal or what you want to do in next 5 years time?

Explain your career aligned with the role you are applying for, don’t tell about your dreams :)

6. Why you think you are the right Candidate for the role? Being on harsh end it can be asked as Convince me to hire you.

This question need some preparation and company research, interviewer is looking for any one candidate who have same goals as the company have.

7. Tell me about how you work as part of a team?

Employer want to know how well you work as a part of team , explain you can work on your own or with any one else , you are a self starter , good time management skills .